FAQ - MotoBatt Pro Lithium Battery
MotoBatt Pro Lithium Battery - Frequently asked questions and answers
|Q1||What makes Motobatt Pro Lithium batteries different from other batter|
MotoBatt Pro Lithium-ion batteries are considered to be safe, Non flammable and non-hazardous; MotoBatt Pro Lithium-ion batteries could be smaller and lighter; have ahogher voltage and a charge much longer than other types of batterieslower self discharge rate than other type of rechargeable batteries, they are charged and will retain their charge for longer tme than other types of rechargeable batteries.
|Q2||What is Motobatt Pro Lithium P series and HP series?|
MotoBatt Pro Lithium-ion batteries P series Internal with balance system.
MotoBatt Pro Lithium-ion batteries HP series Internal with balance & protection system.
|Q3||Why Motobatt P/HP series protection different from others?|
MotoBatt Pro Lithium-ion batteries internal battery protection system is a high-tech innovative design made to protect the lithium cells. Features include:
Internal Cell balancing
Over Charge Protection
Over Discharge Protection
Over Temperature Protection
|Q4||Can I use lead-acid battery charger?|
MotoBatt Pro Lithium batteries can be charged with any three stage charger (constant current/costant voltage) without a desulfation, winter or calcium battery mode. Battery maintainers and any float mode on a three stage battery charger must be limited to 13.6v or less. At no time should the battery charger exceed the maximum amperage and voltage rating on the battery label. In some cases if your battery charger does not reach 14.4v-14.6v during charging it may not fully top off the Motobatt Pro lithium batteries. If there is any uncertainties on charging with ordinary lead acid battery charger, please use PDCFB charger with lithium charging function.
|Q5||Why recommended Motobatt PDCFB charger for ?|
To optimize battery life, a true lithium-ion battery charger is recommended. True lithium-ion battery charger have special algorithms to handle lithium batteries. They typically charge the battery differently when it is deeply discharged, rapid charge the battery when possible, and stop charging when the battery is fully charged to prevent over charge. Motobatt PDCFB chargers are specially designed for this purpose.
|Q6||How do I maintain the Motobatt Pro Lithium batteries ?|
1. Charge new batteries when first used.
2. Use appropriate chargers to avoid over charging.
3. Avoid contaminating metal contacts. All batteries contacts need to be kept clean for best performance.
4. Avoid using often in extreme high or low temperature environments.
5. Avoid long periods without using or recharging. If batteries will be left unused for 3 months or more, partially recharge them (to around 30-70% of capacity, depending on planned storage time), then store the device to prevent battery damage. You may need to take the device out of storage and charge again after a few months.
|Q7||Can Motobatt Pro Lithium batteries be mounted in any position, even upside down?|
Yes, Motobatt Pro Lithium batteries can be mounted in any position, even upsidedown and take vibration. After you take out your old batteries, place Motobatt Pro Lithium batteries in the same way. You can use the same cables to reconnect into the Motobatt Pro Lithium batteries
|Q8||How long will the Motobatt Pro Lithium batteries last?|
The depth of discharge, the storage temperature and the ambient temperature during operation all work together to reduce the life of any lithium ion battery from its projected life span. For longest life do not charge the batteries when at the temperature extremes, either extreme cold or extreme heat. Motobatt Pro Lithium batteries will provide you with up to 1000 complete charge and discharge cycles at 80% DOD. After 1000 cycles, you will still have over 80% of usable energy left.
|Q9||What is the working temperature for Motobatt Pro Lithium batteries?|
Charging: 0ºc to +45ºc
Discharging: -15ºc to +60ºc